INSTALLED SOUND

HL 6

TWO-WAY LINE ARRAY MODULE
  • 1000W Peak Power Handling
  • 131 dB Max SPL
  • 65 ÷ 20000 Hz Frequency Range
  • 100° x 10° Coverage Angles
Where to buy
Features Specifications Accessories Related products Downloads
Where to buy
Features
  • 1000W Peak Power Handling
  • 131 dB Max SPL
  • 65 ÷ 20000 Hz Frequency Range
  • 100° x 10° Coverage Angles
  • 1.75” Neodymium Compression Driver
  • 2 x 6” High-Powered Neodymium Woofers
  • Constant Directivity Waveguide
  • Extremely Low Weight

The RCF HL 6 is an ultra-compact passive two-way full-range system for small and medium-sized spaces. The 1.75" neodymium compression driver with a constant-directivity waveguide design generates a horizontal constant-directivity coverage of 100 degrees over the entire vocal range with remarkable clarity. Two high-power 6" woofers deliver extended low-end up to 131 dB SPL for a wide range of applications, both alone, or in line-array configuration.

Part number:

13000726
HL 6
EAN 8024530019068

RECOMMENDED POWER AMP

XPS SERIES

4 x 4000 W
Class D continuous power
at 2.7 Ohms
40-bit Floating-point
Processing at 96 kHz
Ready-to-Use
Configurations and presets
for RCF speakers
2U Rack Space

for both touring and installed sound systems

Flexible 32-bit Routing
with analog, digital
and Dante I/O
Advanced Fault Protections
for each amplifier channel and power supply
Responsive Image
Full Range Two-Way Line Array with Subs
12 x Double 6" Line Array (HL 6) and
6 x Single 15" Sub (HL 35-S)
Small to Medium Size Venues
Worship Spaces, Sports Facilities, and Concert Halls
Responsive Image

Legendary transducers

The RCF HL 6 features RCF transducers with neodymium magnets. RCF’s experienced engineering teams have specially developed and matched each component. An entire set of protections preserve product life and reliability.
High frequencies
  • High-performance RCF ND340
  • 1.75-inch diaphragm neodymium compression driver
  • 900 Hz crossover point
Low frequencies
  • Two 6” neodymium woofers
  • Low frequencies handling down to 65 Hz
  • Water resistant fiber doped cone
  • Polycotton M-roll surround
  • Hypervented magnetic structure
Responsive Image
Responsive Image

Constant directivity waveguide

The custom-designed waveguide allows a precise coverage of 100° x 10°, while also delivering a completely linear high-frequency response. The constant directivity waveguide delivers consistent coverage from 900 Hz to the highest audible frequencies.
Responsive Image

Perfect for installation

The passive architecture makes the HL 6 one of the lightest line array modules on the market. Combined with flexible rigging options and a wide range of accessories, it's the ideal line array for installation both in corporate environments or music venues. HL 6 provides plenty of sound pressure and clarity that can replace antiquated, oversized sound systems with improved acoustic performance.

Advanced design

The integrated fittings are both easy to use and reconfigurable, allowing the system engineer to create J-shaped and spiral arrays starting at 1° angle.
The hardware is designed for easy and fast setup. Up to 16 HL 6 modules can be fastened on a single flybar.
The heavy-duty front grille is powder-coated. A special transparent-to-sound foam backing inside helps to further protect the transducers from dust and debris.
Responsive Image
Responsive Image

The HL 6’s perfect low-frequency companion

Perfect for keeping the floor clear and maximizing the efficiency and coherence of the array, the low-frequency companion designed for the HL 6 is the high-performance flyable single 15” HL 35-S. The integrated fittings are both easy to use and reconfigurable, allowing the system engineer to extend the HL 6 lower range with one or multiple HL 35-S modules. It can be used attached to the flybar, on the floor, or stacked with the HL 6 on top. HL 35-S provides sound pressure and clarity that can replace antiquated, oversized sound systems with improved acoustic performance.
Specifications
Acoustical specifications
Frequency Response (-10dB)
65 Hz ÷ 20000 Hz
Max SPL @ 1m
131 dB
Horizontal coverage angle
100°
Vertical coverage angle
10°
Directivity index Q
16
Power section
Amplification
Full Range
Nominal Impedance
16 ohm
Power Handling
250 W
Peak Power Handling
1000 W PEAK
Protections
Dynamic Active Mosfet
Crossover Frequencies
900 Hz
Recommended Amplifiers
XPS 16K, XPS 16KD, QPS 10K, QPS 6.0K, IPS 5.0K, IPS 2.5K
Transducers
Compression Driver
1 x 1.0'' neo, 1.75'' v.c
Woofer
2 x 6.0'' neo, 2.0'' v.c
Input/Output section
Input connectors
Speakon
Output connectors
Speakon
Standard compliance
Safety agency
CE compliant
Physical specifications
Hardware
Integrated array mechanics
Handles
2 on the rear panel
Color
Black - RAL 9005
Size
Height
237 mm / 9.33 inches
Width
470 mm / 18.5 inches
Depth
377 mm / 14.84 inches
Weight
11.8 kg / 26.01 lbs
Shipping information
Package Height
260 mm / 10.24 inches
Package Width
550 mm / 21.65 inches
Package Depth
425 mm / 16.73 inches
Package Weight
13.3 kg / 29.32 lbs
Related products
Downloads
MANUALS
USER MANUAL - ENG ITA
PDF
9 MB
09-02-2022
SPECSHEETS
SPECSHEET - DEU
PDF
3.7 MB
26-02-2024
SPECSHEET - ENG
PDF
3.7 MB
26-02-2024
SPECSHEET - FRA
PDF
3.7 MB
26-02-2024
SPECSHEET - ITA
PDF
3.7 MB
26-02-2024
SPECSHEET - SPA
PDF
3.7 MB
26-02-2024
STANDARD COMPLIANCES
CE DECLARATION OF CONFORMITY - ENG
PDF
147 KB
25-08-2022
UKCA DECLARATION OF CONFORMITY - ENG
PDF
162 KB
25-08-2022
DRAWINGS
LINE ART 2D
DXF
7.6 MB
22-01-2024
LINE ART 2D
PDF
940 KB
22-01-2024
LINE ART 3D
DXF
1.3 MB
22-01-2024
SOFTWARE
GLL
GLL
2.8 MB
29-11-2022