RCF EQUIPS NEW £84M WELSH INTERNATIONAL CONFERENCE CENTRE WITH END-TO-END AUDIO

When the £84m International Convention Centre Wales (ICCW) opened in September last year, it was not only the first of its kind in Wales, but this joint venture between the Welsh Government and the Celtic Manor Resort has delivered an astonishing 26,000 sq.m. of floor space for meetings, conferences and exhibitions (the size of four international rugby pitches).

Incorporated within this is a 4,000 sq.m., pillar-free, multi-reconfigurable main hall, which threw up many challenges for technology contractors, Stage Electrics. Their solution was to specify an end-to-end workflow from the extensive RCF catalogue, tying nearly 800 speaker products (and over 1,000 RCF components in total) into a multi-use PA in the main hall and mobile systems for the meeting rooms, merged into a fully-compliant PAVA environment.

Stage Electrics were awarded the contract for A/V, lighting (including public space), technical loose equipment and stage engineering consultancy, as outlined by Russell Phillips, VP, Facilities and Development at Celtic Manor. But first Simon Cooper, who led Stage Electrics’ engineering team, along with Business Development Manager Saul Eagles, needed to initiate a stringent, but uncompromising cost-cutting programme to bring it into budget.

Stage Electrics have enjoyed enormous success installing RCF systems into a wide range of applications for over 15 years, as Dan Aldridge, their Commercial & Projects Director, points out.

Originally, the voice alarm / evacuation had been subject to a separate contract, using another brand. But since this approach would have vastly exceeded the budget, Butler introduced Simon Cooper to Francesco Venturi from RCF’s Engineering Support Group. Talks were quickly finalised to place an RCF DXT 9000 multi-platform comms system (linked to RCF ceiling speakers, aluminium projector speakers, and Media background music speakers at the heart of the set-up.

With cost efficiencies achieved, the entire workflow was now in the hands of a single contractor.

TTL 6-A
The sound reinforcement in the Main Hall functions independent of the PAVA. For this, Stage Electrics provided 18 x TTL 6-A elements, 10 TTL 6-AS active bass modules with RCF SUB 8006-AS providing further LF extension, all controlled using RCF’s proprietary RDNet. The 3-way TTL 6-A line source is equipped with 2 x 12” low frequencies woofers, 4 x 6.5” midranges and a 3.0” voice coil compression driver while the TTL 6-AS contains three 12” woofers. Flexible and quick to rig, this scalable system can be set up as a one-box solution or expanded into a complete column, optimised by allowing the TTL 6-A tilt angle to be set accordingly.

A further six RCF EVOX 10 and four EVOX 12, along with the HD 10-A, HD 12-A and SUB 8006-AS have been provided as a highly portable roll-in/roll-out system for use in their 15 flexible meeting rooms, in addition to Media M 801 for further reproduction purposes, including background.

As Mick Butler points out, “TTL 6-A can do all that and as it’s a line source system with wide horizontal and controlled vertical pattern—you don’t need to do comprehensive calculations every time you reconfigure the room, which can be done extremely quickly with this system.”

In addition to the main hall, the ICCW is a 5-storey building, with a three-floor entrance atrium, meeting rooms, two car park levels and kitchens, as well as a 1500 raked seating auditorium, which proved a major challenge. “After considering Stage Electrics’ requirements we came up with the most fitting topology for every space, considering all parameters,” he said.

The large atrium presented a particular challenge with regard to STI, and this was overcome, with the design validated by EASE measurements, based upon predicted performances.

This approach fulfilled the pre-conditions for a consistent design. In the main hall, DP 1420EN aluminium sound projectors, deployed at a height of nine meters from floor level on a rain-diffusion basis, allow for a measured average STIPA figure that exceeds performance requirements of the Voice Alarm standard.

Regarding EN54-16 certified electronics, signal distribution is via three technical rooms, sharing monitored data and audio (Dante) upon an Ethernet fibre ring-configured network. Besides the emergency facilities, the VA system needed to allow for local inputs broadcast on a zonal basis supporting a third party audio-over-IP distribution system that manages routing and room combining capability by means of wireless control surfaces.

Finally, the client turned to RCF’s wiring department for PAVA rack building, device wiring, testing and pre-configuration. Acceptance testing activity with Stage Electrics was also managed at RCF’s Reggio Emilia HQ. The final count consisted of six cabinets housing EN54-16 certified electronics (matrices and amplifiers), EN54-4 certified battery chargers for secondary power feed (including batteries), distributed in the three technical rooms and interconnected on an Ethernet fibre ring-configured network supported by dedicated network switches programmed by RCF.

The PAVA installation (and wider technical requirements) were commissioned by RCF personnel alongside Stage Electrics team members, comprising Simon Cooper, technical project manager Chris Brant, site team leader Aaron Godsmark and commissioning engineer Steve Chappell.

Speaking of the success of the integration ICCW Head of Technical Services, Simon Denman-Ellis, said: “What the team liked most is the ease of use with the RCF systems. Everything just works seamlessly, a real plug and play set-up but with the high-end sound and reliability you would expect to find in a much more complex system.”