DMA 162P Architectural and Engineering Specifications DESCRIPTION The product shall be a two-channel class-D power amplifier. Output power: either 2 channels x 160 W RMS @ 4 ohm (each) or a single 320 W Hi-Z line. Up to 4 amplifiers can be linked to a single matrix amplifier unit in order to increase the system output power and implement multi-room architectures. Yet, each amplifier can be used as a stand alone amplifier as well. It shall be suitable for either desktop or rack installation. It can receive processed audio signals from a matrix amplifier on a four-channel audio BUS (CAT5 cable), or as alternative, it is possible to select the local stereo LINE input (by closing the dedicated contact). A LINE output is also available, with a switchable low-pass filter for the connection to an active subwoofer. Its configuration can be carried out though either the dip-switches on its rear panel or RDNet® (when its optional board is installed). The amplifier can be installed into a 19” rack cabinet through an optional accessory (required for every pair, as each needs half a rack unit). TECHNICAL SPECIFICATIONS The product shall have the following specifications Amplifier specifications Output Power 2 x 160 W @ 4 ohm 2 x 160 W @ 8 ohm 1 x 320 W @ 4 ohm (bridge) 1 x 320 W @ 8 ohm (bridge) Output power @ 70 V 1 x 320 W @ 70 V SNR Analog inputs >93 dB Amplifier Class D Frequency Response (-3dB) 20 Hz ÷ 20000 Hz Distortion (THD+N) @ 1 kHz nominal power <0.01 % Input section Total number of inputs 6 Balanced 4 Unbalanced 2 Mono 4 Stereo 2 Line inputs 6 Line connectors Picoflex, RCA, RJ45 General Purpose Inputs (GPI) 2 Output section Signal output number 1 Signal output connectors RCA Power output connectors Euroblock Processing DSP Yes EQ Filters Yes FIR Yes Compressors Yes Tone controls Yes High-pass filter 80 Hz ÷ 200 Hz Configuration and control Configuration DIP switch, PC Software RDNet Ready Protocols for system integration Proprietary RCF speakers presets Yes Protections VHF (Very High Frequencies) Yes Cooling Forced Short circuit Yes Thermal Yes DC Yes Fuses Yes Power requirement Power consumption 400 W Operating voltage 90-240 V~ 50/60Hz Standard compliance Safety agency CE compliant, UL 62368-1 Physical specifications Cabinet/Case Material Metal Color Black Rack mounting 1/2 19", 1U , Optional rack mounting accessory required Size Height 44 mm / 1.73 inches Width 213 mm / 8.39 inches Depth 304 mm / 11.97 inches Weight 1.65 kg / 3.64 lbs The product shall be DMA 162P by RCF S.p.A.